How to Beef Up Mid 2012 G5 Tower
How do you upgrade the processors in the "Mid-2010" and "Mid-2012" Mac Pro models? How are the processors mounted?
Delight note that this Q&A explains how to upgrade the processors in the "Mid-2010" and "Mid-2012" Mac Pro models (model identifier MacPro5,i).
EveryMac.com also provides processor upgrade instructions for earlier Mac Pro models -- the original and "Early 2008" (MacPro1,1, MacPro2,1, and MacPro3,1) and "Early on 2009" (MacPro4,1) systems.
Formally, just every bit it has been for all previous Mac Pro models, Apple tree does not land whether or not the processors in the "Mid-2010" or "Mid-2012" Mac Pro lines can be upgraded.
The memory and hard drives are designed to be upgraded past cease-users, and doing so is straightforward, but Apple does not intend for one to upgrade their own processor(due south). Consequently, EveryMac.com does not recommend that i upgrade the processor(south) in a "Mid-2010" or "Mid-2012" Mac Pro themselves.
However, for the technically skilled, upgrading the processors in the "Mid-2010" and "Mid-2012" Mac Pro models is quite possible.
Photo Credit: Apple, Inc. (Mac Pro)
Identification Assist
If you're not sure if you have an "Mid-2010" or "Mid-2012" Mac Pro or an before model, the A1289 Model Number is non precise enough as this identifier is shared by the previous "Early 2009" Mac Pro models, as well.
However, for the purpose of a processor upgrade, the "Mid-2010" and "Mid-2012" Mac Pro models can be identified collectively to a reasonable degree of certainty by the Model Identifier in software and uniquely externally by EMC Number. More data nigh specific identifiers is provided in EveryMac.com's all-encompassing Mac Identification department.
To locate the model identifier, select "Virtually This Mac" under the Apple Carte on your computer and click the "More Info..." button. If the Mac Pro is running OS X "Lion" (x.7) or later on, click the "System Report" button later on clicking "More Info..." as well. Regardless of the release date or the number of processor cores, all "Mid-2010" and "Mid-2012" Mac Pro models share model identifier MacPro5,i. Note that the "Early 2009" Mac Pro models too can exist firmware upgraded to MacPro5,one, and this may be an issue on the resale market.
Consequently, the EMC number, which is listed on the rear of the system in small type, is the most certain identifier. As carefully hand documented by EveryMac.com, the "Mid-2010" Mac Pro models share EMC number 2314-2 and the "Mid-2012" Mac Pro models share EMC number 2629. The "Late 2009" Mac Pro models are EMC number 2314 (note the lack of the "-ii" at the end).
Specifically, these are the systems that are included in the "Mid-2010" and "Mid-2012" Mac Pro lines:
| Mac Pro | Subfamily | Model ID | EMC Number |
| "Quad Core" ii.8 | Mid-2010 | MacPro5,i | 2314-2 |
| "Quad Core" 3.2 | Mid-2010 | MacPro5,1 | 2314-2 |
| "Six Core" 3.33 | Mid-2010 | MacPro5,1 | 2314-ii |
| "Eight Core" 2.4 | Mid-2010 | MacPro5,1 | 2314-2 |
| "Twelve Cadre" 2.66 | Mid-2010 | MacPro5,1 | 2314-2 |
| "Twelve Cadre" two.93 | Mid-2010 | MacPro5,one | 2314-two |
| "Quad Core" 2.8 | Server Mid-2010 | MacPro5,1 | 2314-2 |
| "Quad Core" iii.two | Server Mid-2010 | MacPro5,1 | 2314-two |
| "Vi Core" iii.33 | Server Mid-2010 | MacPro5,1 | 2314-two |
| "8 Core" 2.4 | Server Mid-2010 | MacPro5,1 | 2314-2 |
| "Twelve Cadre" 2.66 | Server Mid-2010 | MacPro5,i | 2314-2 |
| "Twelve Cadre" 2.93 | Server Mid-2010 | MacPro5,1 | 2314-2 |
| "Quad Cadre" 3.2 | Mid-2012 | MacPro5,ane | 2629 |
| "Six Core" three.33 | Mid-2012 | MacPro5,one | 2629 |
| "Twelve Core" 2.4 | Mid-2012 | MacPro5,i | 2629 |
| "Twelve Cadre" 2.66 | Mid-2012 | MacPro5,one | 2629 |
| "Twelve Core" iii.06 | Mid-2012 | MacPro5,1 | 2629 |
| "Quad Core" three.2 | Server Mid-2012 | MacPro5,1 | 2629 |
| "Six Core" three.33 | Server Mid-2012 | MacPro5,1 | 2629 |
| "Twelve Core" 2.4 | Server Mid-2012 | MacPro5,1 | 2629 |
| "Twelve Core" ii.66 | Server Mid-2012 | MacPro5,ane | 2629 |
| "Twelve Core" three.06 | Server Mid-2012 | MacPro5,1 | 2629 |
EveryMac.com's Ultimate Mac Lookup feature also can identify these models by their Series Numbers.
Original Custom Processor Options
By custom configuration, Apple originally offered the "Mid-2010" "Quad Core" model with a three.two GHz Quad Core "Nehalem" Xeon (W3565) processor for an additional US$400 or a single iii.33 GHz Six Core "Westmere" Xeon (W3680) processor for an additional United states$800. Too, by custom configuration, Apple offered the stock "Mid-2010" "Eight Core" model with two 2.66 GHz 6 Core Xeon X5650 processors for an additional United states of america$1500 or two 2.93 GHz Six Core Xeon X5670 processors for an additional US$2700.
Starting on June 11, 2012, when Apple quietly introduced the "Mid-2012" Mac Pro models -- which finer are just processor upgraded "Mid-2010" Mac Pro models themselves -- Apple began to offer the stock "Quad Core" model with a single 3.33 GHz Six Core "Westmere" Xeon (W3680) processor for an boosted Us$500. Likewise, Apple offers the stock "Mid-2012" "Twelve Core" model with two 2.66 GHz Six Core "Westmere" Xeon (X5650) processors or two 3.06 GHz Six Cadre "Westmere" Xeon (X5675) processors for an additional The states$1200 or US$2400, respectively.
Processor Upgrade Instructions
But similar the "Late 2009" Mac Pro models, the "Mid-2010" and "Mid-2012" Mac Pro models have the processor or processors mounted on a removable processor "tray" and the processors themselves use LGA 1366 sockets.
Photo Credit: OWC, Inc.
The general process for the "Mid-2010" and "Mid-2012" Mac Pro lines likewise is the aforementioned equally it is for the "Late 2009" models -- slide the processor tray out of the calculator, unscrew the heatsinks with a 3mm hex key, remove the heatsinks, clean off thermal paste residuum, remove the processors, install the new processors, re-apply thermal paste, reattach the heatsinks, reinsert the processor tray, and close up the computer.
However, on the "Mid-2010" and "Mid-2012" Mac Pro models, Apple uses standard processors rather than ones that lack a "lid" similar their predecessors.
If you are interested in performing the upgrade, yous may find this forum posting with detailed photos from helpful hardware hacker "philipma1957" to be particularly useful. The author successfully upgraded an entry-level Mac Pro "Quad Core" 2.8 (2010) with its Quad Core Xeon W3530 to a 3.2 GHz "Six Core" W3670 processor for roughly 50% more than operation than the stock processor and reported that a 3.33 GHz "6 Core" W3680 will piece of work, as well.
Professional Upgrade Service Pick
For those interested in a professional upgrade service -- site sponsor Other World Computing offers a simple and piece of cake "Turnkey" Mac Pro processor upgrade program for the "Mid-2010" and "Mid-2012" models.
With this service, you first should fill-in your Mac Pro, verify the backup was successful, and turn the system off. And so you merely take to open it up, remove the processor tray and post it to OWC, rather than the entire organisation, in a provided anti-static pocketbook and box.
Typically within 48 hours, OWC will render your processor tray with the faster processor pre-installed. All you have to practice is slide the tray back in your Mac Pro. It'south not cheap, merely it's not much more than than the toll of a new processor and information technology makes the upgrade process fast, simple, and effectively foolproof.
Processor Upgrade Summary
Ultimately, it is quite possible for one to upgrade the stock processors in the "Mid-2010" and "Mid-2012" Mac Pro models with faster ones. Still, even a skilled person should continue with caution as this is most definitely not an upgrade for those with limited hardware upgrading experience.
By reading the above as well every bit the linked forum posting and the details of OWC'due south professional upgrade service, it is hoped that you volition exist able to decide if this is an upgrade yous feel comfortable to perform yourself or if you would rather hire a professional. Hiring a professional ever is a good idea, particularly for an upgrade of this expense and complication.
As well meet:
- How do you upgrade the processors in the "Original/Early 2008" Mac Pro models? How are the processors mounted?
- How do you upgrade the processors in the "Early 2009" Mac Pro models? How are the processors mounted?
EveryMac.com is provided "as is" without warranty of any kind whatsoever. EveryMac.com, and the author thereof, shall not be held responsible or liable, under whatsoever circumstances, for any amercement resulting from the use or disability to use the information within. For consummate disclaimer and copyright data please read and empathise the Terms of Use and the Privacy Policy earlier using EveryMac.com. Use of whatsoever content or images without expressed permission is not immune, although links to any page are welcomed and appreciated.
Source: https://everymac.com/systems/apple/mac_pro/faq/mac-pro-mid-2010-westmere-how-to-upgrade-processors.html
0 Response to "How to Beef Up Mid 2012 G5 Tower"
Post a Comment